How to make the Led flashlight from your iPhone 6 Plus

The Led flashlight is one of the coolest things to come out of the iPhone 6 series.

It’s the first time we’ve seen a product that’s designed for your phone’s OLED display, and it’s one of those products that can make your iPhone seem like a smartwatch.

If you’re looking for the most basic flashlight with a simple, sleek design, the Led LED Light is for you.

If you’re going to build your own LED flashlight, it’s worth reading up on how to build one.

If the Led light you’re using is going to work with your iPhone, the LED light is going in.

That’s because the LED flashlight will power the display of your iPhone.

This means that the LED Light can turn the display on or off, turn on the display to turn on your phone, or turn off the display in order to save battery life.

If the LED is turned on, the light will flash.

This will turn the LED off, so you’ll never be tempted to turn it on again.

The LED Light has a very simple design.

It comes with a 6-inch, 720p LED, which is a bit small, but the screen is bright enough to read.

The light comes in a number of different colors, and there’s also a selection of colors to choose from.

The light also comes in three brightness levels.

When it’s off, the screen will dim, and when it’s on, it’ll glow a bright orange.

There’s also an option to dim the LED, so it won’t flash for you at all.

If your light isn’t going to run, it can also be connected to a power source like the Led charger.

You can use a battery from the charger or a USB port to power the LED on and off.

If it’s not powered up, it will simply flash and won’t even turn on.

You’ll need a 5V USB cable to charge the light, but it’s a little more than you might think.

Here’s what the LEDLight will look like when powered up.

You can also connect it to a speaker, as long as you’re able to plug the speaker directly into the light.

The LEDLight is designed to run on a standard 3.5mm jack, but you can also use a USB-C to 5V cable to connect to a USB hub.

It’s important to note that the LEDs on the LedLight are actually LED strips, not LEDs, so the light won’t light up when you plug the light in.

The LEDs will turn on when you turn on an iPhone.

The reason for this is because the light is powered from an external source, and your iPhone is powered through the Lightning port.

If your light has an internal battery, it won-t turn on because the battery is connected directly to the light’s battery.

If that’s the case, the lights will turn off, and the light on.

Here are some shots of the light working with a speaker.

You’ll also want to use the right battery to power your LED light.

This is because LED lights don’t run as well when plugged into a wall outlet as when plugged directly into an iPhone, so we recommend that you use the light with the charger connected.

If either of those things aren’t possible, you can connect a standard 5V power cable to your light.

If that’s not possible, it is possible to connect an iPhone to the LED lights by plugging the light into the Lightning connector.

That means you’ll need to use a 3.3mm jack to connect the light to your iPhone’s Lightning port, and a USB cable, if you’re connecting to a Lightning hub.

Here’s a video of how to do that.

When it comes to battery life, there are some advantages to using a battery.

For starters, the LEDs don’t need to power up as often as when using a regular light, so there won’t be a significant decrease in battery life during the day.

Battery life isn’t as important as you might expect, as the light can last up to a day and a half of use.

It will last for up to 15 hours on a full charge.

If battery life isn